Crestron electronic on wall speaker Speaker User Manual


 
Audio Distribution System Crestron Adagio™ AADS
NOTE: Volume adjustment is not available when the AADS is in Source mode.
When a source is routed to a room that is not already on, the room will be turned on
at the startup volume specified on page 32.
Room Mode
Room mode is used to select and control a room that is connected to the AADS.
Select a Room
To select a room:
Press ROOM to put the AADS in the Room mode. The current selected
room is displayed on the LCD along with the source that is routed to the
room. If there is no source routed to the room, the display will indicate that
the room is off.
Room Mode
Room 6
XM
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
To select a room, press the selection control up or down until the desired
room is displayed on the LCD and press SELECT. Alternatively, press a
room button on the AADS or AAE (if connected).
Control a Room
After a room is selected, a source can be selected, the room can be turned “off”,
room and global volume can be adjusted, or the room output can be muted.
Select a source by pressing the selection control up or down until the
desired source is displayed on the LCD and pressing the SELECT button.
Press the MORE button to view options for adjusting audio parameters
(global volume, bass, treble, balance, and loudness).
Adjust the room’s volume by pressing up or down on the volume control.
The volume level will be displayed on the LCD.
Mute the room output by pressing the MUTE button (the MUTE LED will
light). Unmute the room by pressing the MUTE button again.
Turn off the room by pressing the room button.
Global Volume
The volume in all rooms can be adjusted from the global volume control.
Adjusting the global volume adjusts the volume in every room that is currently
turned on. The volumes are adjusted proportionately so the room volume levels
do not jump to the same level when the global volume control is used.
To open the global volume control, press the MORE button. The global
volume level will be displayed on the LCD.
Adjust the global volume by pressing up or down on the volume control.
The global volume level will be displayed on the LCD. Press MENU to
return to the room menu.
50 Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458