Filter
Top Products
Crestron Adagio™ AADS Audio Distribution System
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
1
DESCRIPTION
24 IR OUT
(4) 3.5mm tip-ring-sleeve (TRS) mini-
phone ports enable serial communication
in a variety of formats including infrared
and one-way RS-232; Use Crestron
Infrared Emitter Probe (part number
STIRP, sold separately) for controlling
infrared devices. For information on other
serial control cables, contact Crestron.
Tip
Ring
Sleeve
Tip: IR Data Out
Ring: No Connection
Sleeve: Ground
25 TUNER A / TUNER B
AADS/AADSI: The AADS & AADSI have
two AM/FM antenna inputs (labeled
TUNER A and TUNER B) for connecting
the supplied antennas.
AADS-XM: The AADS-XM has one
AM/FM tuner input labeled TUNER A and
one XM tuner input labeled XM for
connecting the supplied antennas.
26 COM A
(1) DB9, male, bidirectional RS-232 port;
Up to 115.2k baud with hardware and
software handshaking support for
communication with serial devices. Can
also be used for modem communications.
The following table lists the pin
assignments of the serial ports.
PIN DIRECTION DESCRIPTION
1 To AADS (DCD) Data Carrier
Detect
2 To AADS (RXD) Receive Data
3 From
AADS
(TXD) Transmit Data
4 From
AADS
(DTR) Data Terminal
Ready
5 Common (GND) Ground
6 From
AADS
(DSR) Data Set
Ready
7 From
AADS
(RTS) Request To
Send
8 To AADS (CTS) Clear To Send
9 To AADS (RI) Ring Indicator
(Continued on following page)
Operations Guide – DOC. 6458 Audio Distribution System: Adagio AADS • 13