Filter
Top Products
Audio Distribution System Crestron Adagio™ AADS
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
1
DESCRIPTION
27 POWER INPUT
Fuse terminal and power connector.
The AADS requires a T8AH-type fuse
rated at 250 Volts
2
. The AADS requires
120 VAC, 50-60 Hz, 7 Amps.
The AADSI requires a T4AH-type fuse
rated at 250 Volts
2
. The AADSI requires
230 VAC, 50-60 Hz, 3.5 Amps
3
.
28 COMPUTER
One 6-pin RJ-11 female, computer
console port. Use with included serial
cable.
Pin 1: CTS
Pin 2: GND
Pin 3: RXD
Pin 4: TXD
Pin 5: RTS
Pin 6: N/C (Not connected)
29 LAN
One 8-wire, RJ-45 female connector with
two LED indicators. The green LED
indicates link status while the yellow LED
indicates Ethernet activity. The port
supports 10BaseT/100BaseTX Ethernet
communications.
30 NET
(2) Four-pin terminal block connectors
provide Cresnet connections to AAE
devices. A four-pin terminal block interface
connector is included for each port.
1. Interface connectors for NET and ROOMS ports are provided with the unit.
2. Refer to “Fuse Replacement” on page 20 for additional details.
3. Refer to “Hardware Hookup”, which begins on page 16 for additional cord details.
14 • Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458