Filter
Top Products
Audio Distribution System Crestron Adagio™ AADS
Name Rooms
This screen allows you to customize the name of each room displayed on the LCD.
• Open Installer Tools as described on page 23, select Name Rooms, and
press the SELECT button.
Select Room To Name
Select Room To Name
1: Room 1
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• To select a room to name, press the selection control up or down until the
room to be named is displayed and press the SELECT button. To cancel
and return to the Installer Tools menu, press MENU.
Room names can be entered using a custom name or any of the factory-installed
room names.
• To use one of the factory-installed names, press the selection control up or
down until the desired room name is displayed and press the SELECT
button.
Select Room Name
Select Room 1 Name
[Foyer]
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• To enter a custom name, press the selection control up until [Custom
Name] is displayed and press the SELECT button.
Edit Room Name
Enter Room 1 Name
Room 2a
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
⇒ Move the cursor position by pressing the selection control up or down.
Select letters (upper and lower-case), numbers, or other characters by
pressing the volume control up or down until the desired letter,
number, or other character is displayed on the LCD.
NOTE: The maximum length for any room name is 16 characters.
After entering the new room name, press the SELECT button to save
the name and return to the list of rooms. If all of the rooms have been
named/renamed, press MENU to return to the Installer Tools menu.
⇒
26 • Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458