Filter
Top Products
Crestron Adagio™ AADS Audio Distribution System
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
1
DESCRIPTION
3 HARDWARE RESET
Recessed below the front panel. Press
this button to initiate a system hardware
reset. This has the same effect as
disconnecting and reconnecting power.
4 SOFTWARE RESET
Recessed below the front panel. Press
this button while the system is running to
restart the program without rebooting the
processor. Hold during reboot to bypass
the custom program and run the built-in
out-of-the-box functionality.
5 STANDBY BUTTON
The STANDBY button places the unit in
Standby. The button is lit when the AADS
is in use. When in Standby, the button will
not be lit, all switching connections are
broken, and all of the amplifier and pre-
amplifier outputs are powered off. Turning
on a room turns on the AADS.
6 SOURCE BUTTON
The SOURCE button places the AADS in
the Source mode.
7 ROOM BUTTON
The ROOM button places the AADS in the
Room mode.
8 PRESETS BUTTON
Used to configure and select preset
groups.
9 MENU BUTTON
The MENU button returns the display
(#10) to the previous screen.
10
LIQUID CRYSTAL
DISPLAY
The Liquid Crystal Display (LCD) shows
system information such as audio controls,
tuner controls, and room controls.
11 LABEL ACCESS
A notch in the front panel allows removal
of the label cover with a flat-head
screwdriver.
12 LABEL STRIP COVER Covers the engraved label strip.
13 ROOM BUTTONS
Room buttons select and indicate the
room(s) controlled by the AADS. Room
buttons also indicate rooms contained in a
room group.
14 BKLT
The BKLT button adjusts the display and
key backlighting to one of three levels
(high, medium, low).
15 SCHED
The SCHED button places the AADS in
the Schedule mode that is programmed in
SystemBuilder.
16 DISPLAY
The DISPLAY button toggles the
information shown on the display (i.e.
artist and/or song title).
(Continued on following page)
Operations Guide – DOC. 6458 Audio Distribution System: Adagio AADS • 11