Filter
Top Products
Crestron Adagio™ AADS Audio Distribution System
Configure Keypads
This screen allows you to assign sources to the top six keys of a C2N-DBF12
keypad. The source assignment is applied to every C2N-DBF12 keypad that is
connected to the system. The functions of the bottom six keys cannot be changed
when using the out-of-the-box program.
• Open Installer Tools as described on page 23, select Configure Keypads,
and press the SELECT button.
Select Button To Map
Select Btn. To Map
1: Server 1
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• Press the selection control up or down to display the button to be mapped
(refer to the diagram below for button locations) and press the SELECT
button. To cancel and return to the Installer Tools menu, press MENU.
Select Source for Button and Button Layout
Select Btn. 1 Src.
1: [Server 1]
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
C2N-DBF12 Keypad Button Layout
BUTTON 1
BUTTON 3
BUTTON 5
BUTTON 2
BUTTON 6
BUTTON 4
• Select the source for the button by pressing the selection control up or down
until the desired source is displayed on the LCD and pressing SELECT. If
a button is not to be used, select Not Used and press SELECT.
• Repeat the process for the remaining buttons. If all of the buttons have been
assigned/reassigned, press MENU to return to the Installer Tools menu.
Operations Guide – DOC. 6458 Audio Distribution System: Adagio AADS • 29