Barco R9010170 Home Theater System User Manual


 
9. Service Mode
9.5 Changing Language
Start up
1. Push the cursor key or to highlight Change Language. (menu 9-11)
2. Press ENTER to display the Change Language menu. (menu 9-12)
3. Push the cursor key or to highlight the desired language.
4. Press ENTER to change the language.
Available languages: English
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with or
then <ENTER>
<EXIT> to return
Menu 9-11
CHANGE LANGUAGE
ENGLISH
Select with or
then <ENTER>
<EXIT> to return
Menu 9-12
9.6 Change Projector Address
How to change the projector address?
1. Push the cursor key or to highlight Change Proj Address. (menu 9-13)
2. Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in. (menu 9-14)
3. Push the cursor key or to highlight Projector address.
4. Press ENTER to activate.
The first digit will be highlighted.
5. Reprogram the address with ,,, keys
Use the or key to select a new value, use the or key to select a new digit.
Or,
use the numeric keys on the RCU to enter the new address.
The address must be between 0 and 9 when controlling the projector with the RCU or
between 0 and 255 when controlling the projector via RS232.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with or
then <ENTER>
<EXIT> to return
Menu 9-13
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with or
then <ENTER>
Reprogram with ,,,
or numeric keys
<ENTER> to confirm
<EXIT> to return.
Menu 9-14
How to change the common address
1. Push the cursor key or to highlight Change Proj Address. (menu 9-15)
2. Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in. (menu 9-16)
3. Push the cursor key or to highlight Common address.
R5976654 SLM R12+ 09022004
95