Filter
Top Products
Using Dicom Theater software
82
Using Dicom Theater software
The Dicom Theater software tool has two purposes: The first goal
is to stabilize the projector. In other words, this is to control the
projector so that it continually conforms to the target situation as
defined in the MediCal Pro preset.
The second function of the software is to allow the user to
perform some of the projector’s controls without using the
projector’s remote control unit.
Stabilizer status
The icons
The application is a sys-tray application, which means an icon
appears in the system bar of Windows, indicating the presence of
this application.
Figure 31
The icon in the sys-tray indicates the status of the stabilization
tool:
The application is stabilizing:
The application is not stabilizing:
Tooltips
Navigate the cursor over the icon. A tooltip appears indicating the
target to which the projector is being stabilized.
If the stabilizer is currently switched off, the tool tip will say: "Not
stabilizing".
In case the stabilization was terminated due to a problem with
the communication with the projector, the text will say: "No
connection with projector".