Filter
Top Products
Introduction
14
DICOM Theater installation overview
To install the DICOM Theater system completely, you have to
follow these steps:
1. Install the BarcoMed display controller(s) in the PC. For more
information, please refer to the section about the “Display
controller installation”.
2. Install and connect the medical grade projector(s) and
display(s). For more information, please refer to the MGP 15
Owner’s Manual and the display User Manual.
3. Install the BarcoMed driver software. For more information,
please refer to the section about the “BarcoMed software
driver installation”.
4. Install the MediCal Pro and DICOM Theater software. For
more information, please refer to the section about the
“MediCal and Dicom Theater software installation and
usage”.
5. Start and use MediCal Pro. For more information, please refer
to the section about the “MediCal and Dicom Theater
software installation and usage” and to the MediCal Pro User
Manual.
6. Install the optical sensor(s).
How to control the medical grade projector
The projector can be controlled:
• Partly, by using the Dicom Theater software. For more
information, please refer to the section about the “MediCal
and Dicom Theater software installation and usage”.
• Completely, by using the projector’s on-screen display. This
can be done with the projector’s remote control unit. For
more information, please refer to the MGP 15 Owner’s
Manual.