Filter
Top Products
Windows 2000 BarcoMed 2MP2CP software installation
39
Figure 13: Sample device selection screen, the device shown in
your system may be different.
Caution: You can install the driver for only one type of
BarcoMed device at a time. If you have multiple types of
BarcoMed devices installed in your computer, you will need
to rerun the installer to install the drivers for the other
devices.
If you select a device with an installed driver, the wizard will
warn you if the installed driver is newer than the one you
are installing (see figure 14 on page 39).
Figure 14
Click “OK” to install the new driver. If you don’t want to
replace the exiting driver, click “OK” and then click
“Cancel”.
7. The “Device Confirmation” screen displays the device driver
that will be installed. If you want to change your selection,