Filter
Top Products
Step 3. Press “Next” for the next prompt (below). The 3653 or 3753LF
Calibration Kits contain a disk with calibration data. The
data has to be installed from the MS462C front panel. To do
so, place the floppy disk from the kit into the MS462XC disk
drive. Press the Cal key then COMPONENTS UTILITIES/IN
-
STALL KIT INFO FROM FLOPPY DISK. softkeys. Press OK
when ready to proceed.
Step 4. Connect the Throughline between Test Ports 1 and 2 on the
MS4782X Test Set.
CAL FILE SETUP OPERATIONS, CALIBRATION
4-16 ME 7840A OMM