Filter
Top Products
CAL SPECIFICATION FILES TECHNICAL DETAILS
ME7840A OMM A-7
<pow2> For Hot S
22
only. Source 2 power setting.
f1 Start frequency in MHz for global calibration
NOTE: Set a wide frequency range. Miminum value is 10; ensure f1 is less
than 2.
f2 Stop frequency in MHz.
Example
Refer to Figure A-2 for Hot S
22
(page A-12) and Figure A-4 (page A-14) for
S Parameters .
Table A-2. Technical Details of Calibration Specification Files (6 of 9).