Filter
Top Products
CAL FILES SETUP.TXT CAL SPECIFICATION FILES
A-12 ME 7840A OMM
ndut,1, //Number of DUTs
type,powsweep
type,harm
type,imd
POWSWEEP_START
ncal,1, //Number of Power Sweep calibrations
npts,3, //Number of points (default for all)
if,3000, //IF default
avgs,20, //averages default
pow,-15, //powerlevel start default
switch,8, //switch setting
CAL,1, name,PowSweep,//File name root (append _1 for DUT1, _2 for
DUT2, etc
f1,900, //Main Tone MHz
f2,931, //Offset KHz
POWSWEEP_END
HARM_START
ncal,1, //Number of Harmonic calibrations
if,3000, //IF default
avgs,20, //averages default
pow,0, //power level start default
switch,8, //switch setting
CAL,1, name,Harmonics,//File name root (append _1 for DUT1, _2 for DUT2,
etc
f1,900 //Main Tone MHz
f2,3000, //Max Range MHz
HARM_END
IMD_START
ncal,1, //Number of IMD calibrations
npts,4, //
pow,-15, //power level setting dBm
if,30000, //IF Bandwidth
avgs,250, //Averages
switch,8, //switch setting
CAL,1, name,Imd, //File name root (append _1 for DUT1, _2 for DUT2,
etc
f1,900, //Main Tone MHz
f2,977, //Offset KHz
IMD_END
Figure A-2. Cal Files Setup Calibration Specification File
{
Header
Calibration Specifications
{
Section 1
{
Section 2
{
Section 3
{