Filter
Top Products
11-APR-06 Rev E OMACS3000
43 of 51
System Screens
"Invalid satellite data entered for satID=nnnnn"
Operator made error in editing or adding satellite data to satellite with the Norad ID of nnnnn. The operator
must correct the satellite entry.
"MCU error ON (or OFF) - Az East Hardware Limits".
Az East Hardware Limits reached.
"MCU error ON (or OFF) - Az West Hardware Limits".
Az West Hardware Limits reached.
"MCU error ON (or OFF) - El Up Hardware Limits".
El Up Hardware Limits reached.
"MCU error ON (or OFF) - El Down Hardware Limits".
El Down Hardware Limits reached.
"MCU error ON (or OFF) - Pol Clockwise Hardware Limits".
Pol Clockwise Hardware Limits reached.
"MCU error ON (or OFF) - Pol Counterclockwise Hardware Limits".
Pol Counterclockwise Hardware Limits reached.
"MCU error ON (or OFF) - Az East Software Limits".
Az East Software Limits reached.
"MCU error ON (or OFF) - Az West Software Limits".
Az West Software Limits reached.
"MCU error ON (or OFF) - El Up Software Limits".
El Up Software Limits reached.
"MCU error ON (or OFF) - El Down Software Limits".
El Down Software Limits reached.
"MCU error ON (or OFF) - Pol Clockwise Software Limits".
Pol Clockwise Software Limits reached.
"MCU error ON (or OFF) - Pol Counterclockwise Software Limits".
Pol Counterclockwise Software Limits reached.
"MCU error ON (or OFF) - Az move hardware timeout".
Az move hardware timeout. Axis has failed to reach the commanded position within the allowed time.
"MCU error ON (or OFF) - El move hardware timeout".
El move hardware timeout. Axis has failed to reach the commanded position within the allowed time.
"MCU error ON (or OFF) - Pol move hardware timeout".
Pol move hardware timeout. Axis has failed to reach the commanded position within the allowed time.
"MCU error ON (or OFF) - Az Direction".
Az Direction. Axis is moving in the opposite direction of the commanded position.
"MCU error ON (or OFF) - El Direction".
El Direction. Axis is moving in the opposite direction of the commanded position.