Filter
Top Products
11-APR-06 Rev E OMACS3000
25 of 51
System Screens
Figure 17: Dual Speed Pol Hardware Limits Screen
Select Base Satellite
This step in the initialization process selects the satellite that will be used to peak the beacon, compute the
look angles, and calibrate the azimuth and elevation resolvers. The screen normally displays visible satellites
in black font while satellites in red font are not visible from the current site location. However, during the first
time an antenna is initialized, all satellites may be displayed as red since the antenna limits have not been
set and valid resolver readings have not been set. Selecting a satellite that is red will not cause a problem.
Left click on the satellite to select and hightlight, then select Next to continue initialization. (See
Figure 18
.)
Note: the satellite number shown in
Figure 18
is the NORAD satellite ID.