Filter
Top Products
11-APR-06 Rev E OMACS3000
12 of 51
System Setup
Figure 2: LMKVS-CPU Admin Application
Follow the menu options to set up the antenna controller box IP address. In order for the changes to be
applied, the 'Save New Values to Config File' option must be executed and the antenna controller box must
be rebooted (option R). The reboot of the antenna controller box will cause the telnet session to be dropped.
The exit option does not have to be executed in that case. After the telnet session is dropped, verify the
change in the antenna controller box IP address by pinging the new address from the MS-DOS window.
Regional Options Setup
In order for the Java application to work correctly on the operator’s computer, the Regional Options on the
PC must be set to English (United States). This may be done through the Control Panel by selecting
Regional Options. Under the general tab, verify or correct the “Your Location” box to read English (United
States). If the “Your Location” box is not set correctly, the numbers may be interpreted badly and the
ACS3000 system will not operate as expected.