Filter
Top Products
PITCH ADJUSTMENTS
©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 29
Figure 45
4. JOG WHEEL (20):
The JOG WHEEL will temporarily bend the pitch if a track is in
playback mode Rotating the wheel in a clockwise direction will
increase your track pitch and rotating the wheel in a counter-
clockwise direction will slow your track pitch. The speed you
rotate the JOG WHEEL will determine pitch bend percentage
(%). For example, if the JOG WHEEL is continuously turned in
a counter-clockwise direction the playback speed will steadily
decreases and will continue to decrease until playback reaches
a maximum of -100% and playback stops entirely. When you
stop turning the JOG WHEEL the disc speed will automati
cally
return to
it’s previous set speed.
NOTE: To use the JOG WHEEL in a pitch bend function
when the SCRATCH EFFECT (4) is activated you must use
the outer ring of the jog wheel where the black rubber
insulator is attached.
3. PITCH BEND BUTTONS (25 & 26):
The (+) PITCH BEND BUTTON (26) will increase track playback speed and the (-) PITCH BEND BUTTON (26)
will decrease track playback speed. The extent to which the speed changes is proportionate to the amount
of time the button is pressed. For example, if the (+) PITCH BEND BUTTON (26)
is held down continuously as
in figure 43, the disc speed will increases and will continue to increase until it reaches a maximum of 100%
speed gain. When you release the (+) PITCH BEND BUTTON (26)
the disc speed will automatically return to
it’s previous set speed.