Filter
Top Products
BASIC OPERATIONS
Figure 7: Hold down the Eject
Button to remove a disc.
Figure 6: When loading a disc always hold the disc
by it edges and load the disc label side up.
Figure 8: Tapping the reverse track button will
jump back to the previous track.
Figure 9: Tapping the forward track button
will skip forward to the next track.
1. LOADING/EJECTING DISCS
The DCD-PRO1000™ can only play 3 and 5 inch CDs. Odd shaped, and oval CDs are not compatible. When
loading a CD into the transport tray, always hold the disc by it edge (see Figure 6). Load the disc label side up
and place it in the disc tray. Never touch the signal surface (the glossy side). To remove a disc from the tray
press the EJECT BUTTON (1), see Figure 7.
CAUTION:
•
NEVER attempt to load any other objects besides a 3" or 5" CD.
• NEVER attempt to load more than one disc at a time. Doing so may result in sever damage to your unit.
•
NEVER force the transport tray open or closed when the power is off, as this may result in malfunction
and damage the transport system.
2. SELECTING TRACKS
Select a desired track by using either of the two TRACK BUTTONS (3 & 4). Tapping the TRACK BUTTONS
(3 & 4) once will select either the next higher or lower track. You may hold down the
TRACK BUTTONS (3 &
4) to change tracks continuously at a faster speed. If you are using the TRACK BUTTONS (3 & 4) to select a
new track during playback (a track is already in play mode) the new track you selected will immediately begin
playback as soon as the search operation is completed.
©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 16