Filter
Top Products
BASIC OPERATIONS (CONT.)
©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 25
TIME BAR INDICATOR - Details the time defined in the TIME METER (65, 66, & 67) as a visual bar icon. As
with the TIME METER (65, 66, & 67
) this bar is also dependent on the selected time function TOTAL REMAIN
(58), OR REMAIN (58)
. This bar will begin to flash when a track is ending regardless of which time function
you are in. Use the flashing bar as a visual reminder that a track is ending.
15. CHANGING THE TIME DISPLAY (65, 66, & 67)\TIME
BAR (64):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON
(21), will change the time display information (65, 66, 67, & 64) in
the LCD (16) see figure 34. The following is a break down of the
time settings and their definitions:
ELAPSED (64) - This describes the time in the LCD (65, 66,
& 67) as the current TRACKS Elapsed running time.
REMAIN (58) - This describes the time in the LCD (65, 66,
& 67) as the current TRACKS remaining running time.
1)
TOTAL REMAIN (58) - This describes the time in the LCD
(65, 66, & 67) as the disc total remaining running time.
3)
2)
Figure 34
Figure 33
IN CUE MODE: While in cue mode and when the
touch sensitivity function is active, tapping on the
JOG
WHEEL (20) can be used to start playback. The unit
will continue to playback until the JOG WHEEL (20) is
released. One the JOG WHEEL (20) is released the unit
will return to the last cue point.