Filter
Top Products
©American Audio® - www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 15
GENERAL FUNCTIONS AND CONTROLS (Cont.)
D. LCD DISPLAY PANEL (FIGURE 5)
52. PLAY INDICATOR - The "PLAY" indicator will
glow when the unit is in play mode.
53. TRACK INDICATOR - This 2-digit indicator
visually details the current track cued or playing.
54. VISUAL MARKER DISPLAY WITH 1:1 RATIO
- Indicates the direction the CD is rotating.
Counter-Clockwise rotation means the CD is play
-
ing in reverse.
55. SINGLE INDICATOR - This indicates that the
CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi
-
cator is not on the unit is in continuous mode In
continuous mode the drive will play all the remain
-
ing tracks on the disc. Once the remaining tracks
have ended the unit will return to cue mode
56. LOOP - This icon will flash when you are in
loop mode. This icon will glow when a loop has
been created but is not actively playing.
57. RELOOP INDICATOR - Appears when LOOP
is engaged or ready to be engaged.
58. REMAIN INDICATOR - When "
REMAIN"
is indicated in the LCD DISPLAY (34) the
TIME
DESCRIBED (65, 66, & 67)
in the LCD will define
the current track's remaining time.
58. TOTAL/REMAIN INDICATOR - When
"TOTAL" and "REMAIN" are indicated in the
LCD DISPLAY (34)
the TIME DESCRIBED (54,
55, & 56)
in the LCD (34) will define the total disc
remaining time.
59. PAUSE INDICATOR - This indicator will glow
when the drive is in pause mode.
60. MEMORY BUCKET INDICATOR - This indi
-
cator serves two functions. The bucket outline
details the cue memory status, a full bucket
outline indicates the cue memory is full. The five
bars in the memory bucket detail the anti-shock
memory state. Each bar indicates 2 second of
digital anti-shock. The search functions will not
operate until all the bars are full.
61. CUE INDICATOR - This indicator will glow
when the unit is in CUE or mode and will flash
every time a new CUE POINT is set.
62. PITCH/BPM METER - This meter will dis-
play either the pitch percentage applied by the
PITCH SLIDER (18) or the BPM's.
63. BPM/PITCH INDICATOR - Indicator will light
up whatever is being displayed.
64. TIME BAR INDICATOR - This bar gives a
visual approximation of a track's or disc's remain
-
ing time. This bar will begin to flash when a CD is
ending or a track if the unit is in "SINGLE" mode.
65, 66, 67. TIME DISPLAY - These indica
-
tors detail the Minutes, Seconds, and Frames.
The meter will display either the elapsed, total,
or remaining time of a track or disc. The time
displayed in the meter will directly reflect the
time indicator above TOTAL REMAIN (58), OR
REMAIN (58).
52
62
60
59
58
57
56
55
54
53
66
65
64
63
61
67
Figure 5