Filter
Top Products
To check the time remaining until the power is turned off
Press JOG MODE repeatedly until "SLEEP" is displayed. The remaining time is displayed for 3 seconds.
To cancel the sleep timer
Press JOG MODE repeatedly until "SLEEP" is displayed, then turn MULTI JOG within 3 seconds so that
"SLEEPoFF" appears on the display.
CLOCK AND TIMER (cont.) pg. 16
SETTING THE TIMER
The unit can be turned on at a specified time every day with the built-in timer.
Preparation
Make sure the clock is set correctly. (See page 15).
1 Press JOG MODE repeatedly until " " is displayed, then turn MULTI JOG within 2 seconds until " "
appears on the display. Then press ENTER within 6 seconds.
The time flashes.
If you press ENTER after 6 seconds, another operation may start.
2 Designate the timer-on time by pressing or then press ENTER.
To change the timer-on time by 30 minutes, press and hold down or .
• MULTI JOG is also available instead of and .
After you designate the timer-on time, one of the source names flashes on the display.