Filter
Top Products
it again.
Sound adjustment during recording
The output volume and tone of the speakers or headphones may be freely varied without affecting the recording.
INSERTING BLANK SPACE
Insertion of 4-second blank spaces may help you to locate the beginning of the track on other equipment. This unit
can add 16 blank spaces only when the source is TUNER or VIDEO/AUX.
1 Press REC/REC MUTE during recording or while in recording pause mode.
on the display flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the
recording pause mode.
2 Press to resume recording.
To insert a blank space of less than 4 seconds, press REC/REC MUTE again while is flashing.
To insert blank spaces of more than 4 seconds, after the deck enters the recording pause mode, press
REC/REC MUTE again.
Each time REC/REC MUTE is pressed, a 4-second blank space is added.
*This unit does not have the function to locate the beginning of track.
Recording cannot be done when TAPE function is selected.
To erase a recording
1 Insert the tape to be erased into the deck.
2 Set the tape to the point where the erasure is to be started.
3 Set the reverse mode by pressing TAPE/REV MODE.
4 Press VIDEO/AUX and turn the connected equipment off.
5 Press REC/REC MUTE to start the erasure.
RECORDING (cont) pg. 13
AI EDIT RECORDING
The AI edit recording function enables CD recording without worrying about tape length and track length. When a
CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged
so that no track is cut short.
(AI: Artificial Intelligence)