Filter
Top Products
To change the program of each side
Press MODE to select side A or B, and press to clear the program on the selected side. Then program tracks
again.
To clear the edit program
Press twice so that "EDIT" disappears on the display.
• Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
• Up to 30 tracks can be programmed from anyh of the inserted disc.
CLOCK AND TIMER pg. 15
SETTING THE CLOCK
Set the clock during power on.
1 Press DISPLAY on the remote control and press within 4 seconds.
The display flashes.
2 Press or to designate the time, then press .
Each time or is pressed the time changes by 1 minute. To change the time by 30 minutes, press and hold
down or .
• MULTI JOG is also available instead of and .
To display the current time