Filter
Top Products
Play begins with the first track.
To stop play, press .
To pause play, press . To resume play, press again.
To search for a particular point during playback, keep or pressed and release it at the desired point.
To skip to the beginning of a track during playback, press or repeatedly.
To remove disc, press OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc begins.
When OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened.
To check the remaining time
During play, press DISPLAY thrice on the remote control. The amount of time remaining until all tracks finish
playing is displayed. Press DISPLAY again to restore the playing time display.
Selecting a track with the remote control
Press numbered buttons 0-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 1Oth track, press +10 and 0.
The selected track starts to play and continues to the end of that disc.
• When removing the disc, press to stop play before pressing OPEN/CLOSE.
• When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.
• Do not place more than one compact disc on the disc tray.
• Do not tilt the unit with disc loaded. Doing so may cause malfunctions.
RANDOM/REPEAT PLAY
RANDOM play
All the tracks on the disc can be played randomly.
Press MODE on the remote control until "RANDOM" lights up on the display.
To cancel random, press the button once during play mode or press the button four times during stop mode.
• During random play, it is not possible to skip to the previously played track with .
• During random play, direct selection of the tracks with the numbered buttons will cancel random play.
• During random play, " 1" play cannot be performed and remaining time cannot be checked.
CD PLAYING (cont) pg. 10
REPEAT play