Filter
Top Products
26
En
Tuning in to preset stations
On the unit
1
Press TUNER/BAND to select the band.
2
Press cPRESET repeatedly.
With each press, the station with the succeeding preset
number is tuned in.
On the remote control
1
Press TUNER/BAND to select the band.
2
Press the numbered button(s) for the preset
number of your desired station.
-To select preset number 20, press +10, +10 and 0.
-To select preset number 15, press +10 and 5.
cPRESET is also available.
To clear a preset station
1Tune in to the station by preset tuning.
2 Press sCLEAR, then press aSET within 4 seconds.
Preset numbers of preset stations in the band with higher
numbers decrease by one.
Adjustments
Antennas
Keep antennas away from metallic objects, electrical equipment
and cords.
FM antenna: Extend fully in a T-shape. If receiving condition
is poor, connect optional outdoor antenna to FM 75 Ω
terminal. Be sure to connect the shield braid of the antenna
to the 2 terminal.
AM antenna: Rotate to find best reception.
To switch to monaural FM reception
Press SHIFT+MONO TUNER on the remote control. With each
press, "MONO" and "STEREO" are displayed alternately
on the display.
•When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the AM tuning interval
Hold down TUNER/BAND and press POWER on the unit. With
each press, the AM tuning interval alternates between 9 kHz/
step and 10 kHz/step.
•The default is 10 kHz/step. Change it only when using the
unit in a 9 kHz/step area. Switching AM tuning interval clears
all the station presets.