Filter
Top Products
16
En
Playing back with the software
specific menu (DVDs and VCDs only)
This unit supports the menu interface of DVDs, and VCDs with
PBC. The menu screen may be displayed automatically when
the disc is loaded.
Use the remote control.
DVDs
1
Press vVBb to select your desired program.
2
Press ENTER to begin playback.
To display the menu
Press TITLE or MENU during playback or stop.
VCDs
To select a program from the menu
Press the number button(s) to select your desired
program.
To display the menu
Press RETURN.
•For some DVDs you can select the menu language out of
the ones available. See “Disc Menu”, page 33.
•Contents and operation of the software specific menu vary
with the disc. Follow the instructions on the disc and on the
menu screen.
Stopping and pausing
To stop playback
Press s.
Playback stops. The unit remembers the point at which
playback stopped.
To resume playback from the point where it stopped
Press c.
“RESUME” appears on the TV display and playback starts
where it last stopped (Resume function).
To clear the point to be resumed
Press s again during stop.
“RESUME OFF” appears on the TV display. The resume
memory is cleared, and playback starts at the beginning of
the disc when c is pressed.
Notes on the resume function
•The point to be resumed is also cleared when the disc tray
is opened, the current disc is switched, the power is turned
off, or the function is switched.
•The resume function is not available for PBC playback of
VCDs. To turn off PBC, see “Disabling PBC” below.
To pause playback
Press a.
To resume playback, press c.
Disabling PBC (VCD only)
Press SHIFT+PBC on the remote control.
"PBC" disappears from the display, and the menu playback
feature is disabled.
•With PBC disabled, VCDs are played just like audio CDs.
This allows you, for example, to use repeat playback and
programmed playback for VCDs with PBC.
•If PBC is pressed during playback, playback stops.
•See also “Types of VCDs”, page 14.