Filter
Top Products
25
En
RADIO
Manual tuning
1
Press TUNER/BAND repeatedly to select a band.
The unit switches to the radio from any other function and
alternates between FM and AM.
2
Press fDOWN or gUP to tune in to a
station.
"TUNE" is displayed when a station is tuned in.
"1" lights up for FM stereo reception.
To search for a station automatically (Auto Search)
Hold down fDOWN or gUP.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press fDOWN or gUP.
•Auto Search may not stop at stations with weak signals.
Preset tuning
Preset your favorite stations and tune them in directly.
Presetting stations
1
Press TUNER/BAND to select the band.
2
Press fDOWN or gUP to tune in to the
desired station.
3
Press aSET to store the station.
The preset number, beginning from "1", appears on the
display.
4
Repeat step 1 to 3 to preset other stations.
•You cannot store more than a total of 32 preset stations.
"FULL" is displayed.
•If power is interrupted for more than approximately 12 hours,
all settings stored in memory after purchase need to be reset.
Adjusting delay time
Sounds from the surround speakers and the center speaker are
reproduced a split second after the front speakers for the effect
of depth.
1
Play the surround source.
- Delay time adjustment of the center channel is available
only when playing Dolby Digital or DTS multichannel
sources.
2
Press SURROUND repeatedly to select the mode
for the speaker configuration.
3
Press SHIFT+MAN/SEL repeatedly on the remote
control to select delay time to adjust.
-C _MS: delay time setting for center speaker
-S _MS: delay time setting for surround speakers
4
Press f or g on the remote control to
adjust the delay time.
Center speaker: adjust the delay time so that screen dialogs
are heard clearly and naturally, between 0 ms
(milliseconds) and 5 ms in 1 ms steps. The default is
"C 0MS" (no delay).
Surround speakers
Dolby Digital/DTS: adjust between 0 and 15 ms in 5 ms
steps. The default is "S 5MS".
Dolby Pro Logic: adjust to 15 ms, 20 ms or 30 ms. The
default is "S 20MS".
•Delay time setting in Dolby Digital/DTS affects that of Dolby
Pro Logic, and vice versa.
•Delay time adjustment is available only for speakers that
are activated.