Filter
Top Products
19
En
Programmed playback (CDs and VCDs
only)
Up to 30 tracks can be played back in the order of selection.
1
Press SHIFT+RANDOM/PRGM on the remote
control in stop mode.
“PROGRAM” appears on the TV screen and "PRGM"
flashes on the unit’s display.
2
Press the numbered button(s) on the remote
control for the track to be played first.
To select track 12, press +10, 2.
To select track 20, press +10, +10, 0.
3
Repeat step 2 to program other tracks.
4
Press c to start playback.
The programmed tracks are played back in the order of
entry.
When programmed playback is complete or when s is
pressed to stop playback, the program display reappears.
•For VCDs with PBC, turn off PBC first (see "Disabling PBC",
page 16).
•During programmed playback, you cannot select a track with
the numbered buttons.
•If the total playing time of the program exceeds 99 minutes
and 59 seconds, the playing time is displayed as
"- -:- -".
To stop programmed playback
Press s.
At this point, the program is not cleared. Pressing c will
restart programmed playback from the first programmed track.
To clear the program
Press s again during stop.
•The program is also cleared when the disc tray is opened,
the function is switched or the power is turned off.
To check the program
Press g during stop.
With each press, the program number and the track number
are shown progressively on the unit’s display.
To add tracks to the program
Repeat step 2 in stop mode. The new tracks are added to the
end of the program .
To skip tracks
Press f or g repeatedly during playback.
Playback skips to the previous or the succeeding track(s)
within the program.
Random playback (CDs and VCDs
only)
Tracks can be played back randomly.
1
Press SHIFT+RANDOM/PRGM repeatedly on the
remote control to display "RANDOM" on the
unit's display.
“RANDOM” appears on the TV screen.
2
Press c to start playback.
To cancel random playback
Press SHIFT+RANDOM/PRGM once on the remote control.
“OFF” appears on the TV screen and "RANDOM" disappears
on the unit’s display.
•For VCDs with PBC, turn off PBC first (see "Disabling PBC",
page 16).
Changing audio channels (VCDs)
Use this function when playing Karaoke VCDs or VCDs with
different sound tracks in the left and right channels.
Press SHIFT+AUDIO SELECT repeatedly during
playback.
With each press, the audio channel changes as follows:
- Lch: left audio channel is output from both front speakers
- Rch: right audio channel is output from both front
speakers
- STEREO: normal stereo playback
•It is impossible to connect a microphone to this unit and
sing along to music sources.
•
Audio tracks of DVDs can also be switched. See "Changing
audio tracks", page 21.