Filter
Top Products
To connect the analyzer to a LAN
Analyzers with option UFG, 4 megabyte extended RAM and additional I/O, have
a ThinLAN and AUI (attachment unit interface) port for connecting the analyzer
to the LAN (local area network).
1 Set the power switch to off ( O ).
2 Connect the ThinLAN BNC cable to the ThinLAN port or the appropriate media
access unit (MAU) to the AUI port.
3 Set the power switch to on ( l ).
4 Press the following keys:
[
Local/Setup
]
[
LAN port setup
]
[
port select ThinLAN (BNC)
]or[
port select AUI (MAU)
]
[
IP address
]
internet protocol address
[
Return
]
[
LAN power-on active
]
See your LAN system administrator for the internet protocol address. Your LAN
system administrator can also tell you if you need to set the gateway address or
subnet mask.
Preparing the Analyzer for Use
7-14