Filter
Top Products
To transport the analyzer
Disconnect the IF section from the RF section and package each section using
the original factory packaging or packaging identical to the factory packaging.
Containers and materials identical to those used in factory packaging are
available through Hewlett-Packard offices.
If returning the analyzer to Hewlett-Packard for service, attach a tag to each
container describing the following:
Type of service required
Return address
Model number
Full serial number
In any correspondence, refer to the analyzer by model number and both serial
numbers.
Mark the containers FRAGILE to ensure careful handling.
If necessary to package the analyzer in containers other than original
packaging, observe the following (use of other packaging is not recommended):
Wrap each section in heavy paper or anti-static plastic.
Protect the front panels with cardboard.
Use double-wall cartons made of at least 350-pound test material.
Cushion each section to prevent damage.
Caution Do not use styrene pellets in any shape as packing material for the analyzer.
The pellets do not adequately cushion the analyzer and do not prevent the
analyzer from shifting in the carton. In addition, the pellets create static
electricity which can damage electronic components.
Preparing the Analyzer for Use
7-20