Filter
Top Products
To install the analyzer
The analyzer is shipped with plastic feet in place, ready for use as a portable
bench analyzer. The plastic feet are shaped to make full-width modular
instruments self-align when they are stacked.
Install the analyzer to allow free circulation of cooling air.
Cooling air enters the analyzer through the rear panel and exhausts through
both sides.
Warning To prevent potential fire or shock hazard, do not expose the analyzer
to rain or other excessive moisture.
Protect the analyzer from moisture and temperatures or temperature changes
that cause condensation within the analyzer.
The operating environment specifications for the analyzer are listed in the
Technical Data publication in the beginning of your Installation and
Verification Guide.
Caution Use of the equipment in an environment containing dirt, dust, or corrosive
substances will drastically reduce the life of the disk drive and the flexible disks.
The flexible disks should be stored in a dry, static-free environment.
To install the analyzer in an equipment cabinet, follow the instructions shipped
with the rack mount kits.
Preparing the Analyzer for Use
7-9