Filter
Top Products
7 Using expansion features
Using an USB thumb drive
66
3 Push the card into the slot using your finger until you feel the card lock and hear an
audible system sound. This indicates that the card is properly seated within the slot.
Removing an SD/CF
card
1 Hold your handheld securely.
2 Release the card from the slot by using your thumb to push against the top of the
card, as if you were pushing it further into the slot (a). An audible system sound and a
click will signal that the card has been released.
3 Gently remove the card from the slot (b).
Using an USB thumb drive
Your Acer n50 supports USB host expansion. Via cradle or sync cable, you can access a
USB thumb drive directly on your n50.
Inserting an USB thumb drive - Connecting the Cradle
1 Connect the AC adapter cord to the power socket at the back of the cradle.
2 Plug the AC adapter into any AC current outlet.
3 Plug the USB client connector into an available USB port on your computer.
4 Insert the USB thumb drive into USB host port of Cradle.
Removing an USB thumb drive - Connecting the Cradle
1 Remove the USB thumb drive from USB host port of Cradle.
2 You can keep device on the Cradle, or remove it from Cradle.