Filter
Top Products
6 Backup and restore data
61
AutoBackup function
With AutoBackup, you can set your handheld to perform an automatic data backup
when battery power is lower than 30%. For configuring in AutoBackup screen, please
refer to the instructions described in "Backup function".
For
When AutoBackup is activated and the specified storage device is not attached to
your handheld when 30% of battery level is reached, then no backup procedure will
be performed.
NOTE: 'MyAutoBackup' is the default file name of the backup file generated by the
AutoBackup operation.
Restore function
You can only restore backup files that are generated by Backup/Restore; file format is
*.abk (Acer backup).
To perform data restoration
1 Close all running programs except for Backup/Restore.