Filter
Top Products
1 Getting started
Acer n50 tour
5
NOTE: If your handheld is turned off, pressing any Quick button turns on the handheld and
opens the program assigned to that button.
Left view
Using the backlight
If lighting conditions make it difficult for you to see the information on your
handheld, use the backlight to illuminate your screen.
To activate the backlight:
• Press the power button and hold it down for about two seconds. Release the
button when the backlight turns on.
• To turn off the backlight, press the power button and hold it down for two
seconds. Release the button when the backlight turns off.
6 Quick button for
Contacts
Activates the Contacts program. For more information on
this program, refer to page 37.
7 Quick button for
Messaging
Activates the Messaging program. For more information
on this program, refer to page 42.
No. Component Description
No. Label Description
1 Soft Reset Using the tip of your stylus, lightly press the reset button in-
side the hole on the buttom of your handheld.
2 Power button Press to turn on your handheld on (power LED lights up
green) if it is off and returns to the last screen that was
displayed and off if it is on.
3 Hold switch Slide to lock all buttons from being accidentally pressed when
handheld is placed in pocket or bag. A red dot is visible on
the hold switch when in hold state.