Filter
Top Products
91 En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
ADVANCED
OPERATION
• “CENTER”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”,
“PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP”
(see page 88), “SUR. L/R SP” (see page 88), “SUR. B L/R SP”
(see page 89), “LFE/BASS OUT” (see page 87) and
“PRESENCE SP” (see page 89) are set to “NONE”
respectively.
• Instead of “SB L” and “SB R”, “SB” is displayed if “SUR. B L/
R SP” is set to either “SMLx1” or “LRGx1” (see page 89).
■ Test tone D)TEST TONE
Turns the test tone output on or off for the SPEAKER
SET, SP LEVEL and SP DISTANCE settings.
Choices: ON, OFF
y
If you use a handheld sound pressure level meter, hold at arm’s
length and point upwards so that the meter is in the listening
position. With the meter set to the 70 dB scale and to C SLOW,
calibrate each speaker to 75 dB.
• This function is automatically turned off if you exit “BASIC
MENU”.
• If you select “ON” and enter the “SPEAKER SET”, “SP
LEVEL” or “SP DISTANCE” menu, the test tone is output from
the selected speakers.
Use to manually adjust speaker settings or compensate for
video signal processing delays when using LCD monitors
or projectors. Most of the SOUND MENU parameters are
set automatically when you run AUTO SETUP (see
page 32).
■ Equalizer A)EQUALIZER
Use this feature to select the parametric equalizer or the
graphic equalizer.
Equalizer select SELECT
Use this feature to select the type of equalizer.
Choices: AUTO PEQ, GEQ, EQ OFF
• Select “AUTO PEQ” to use the parametric equalizer
adjusted in “AUTO SETUP” (see page 32).
• Select “GEQ” to adjust the built-in 7-frequency band
graphic equalizer so that the tonal quality of the
speaker matches. Press ENTER to display the graphic
equalizer screen.
• Select “EQ OFF” to deactivate the equalizing feature.
You can select “AUTO PEQ” only when you carry out “AUTO
SETUP” in advance (see page 32). In this case, “AUTO PEQ” is
automatically selected as the default setting.
Notes
Notes
[]/[]:Select
TEST TONE;;;;OFF
D)TEST TONE
)
)
2 SOUND MENU
Note
. A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)AUDIO SET
2 SOUND
MENU 1/2
[]/[]:Up/Down
[ENTER]:Enter
p
p
. E)HDMI SET
2 SOUND
MENU 2/2
[]/[]:Up/Down
[ENTER]:Enter
p
p
SELECT;;;;;;;GEQ
A)EQUALIZER
[]/[]:Adjust
[ENTER]:Enter
)
)
01EN_00_RX-V1700_U.book Page 91 Tuesday, June 27, 2006 9:37 AM