Filter
Top Products
99 En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
ADVANCED
OPERATION
■ Audio select C)AUDIO SELECT
Use this feature to designate the default input mode for the
input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select “LAST” if you want this unit to automatically
select the last input mode used for the connected input
source.
Selecting “LAST” does not recall the last setting for the EXTD
SUR. button on the remote control.
■ Decoder mode D)DECODER MODE
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select “AUTO” to if you want this unit to
automatically detect the type of input signals and select
the appropriate decoder mode.
• Select “LAST” to if you want this unit to automatically
select the last decoder mode used the connected input
source.
Selecting “LAST” does not recall the last setting for the EXTD
SUR. button on the remote control.
■ Parameter initialization E)PARAM.INI
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound
field
program that you want to initialize.
An asterisk (*) appears to the left of the sound field
program names that have been changed from their initial
factory settings.
Choices: CLASSICAL, LIVE/CLUB,
ENTERTAINMENT, MOVIE, STEREO,
SURROUND DECODE
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
“MEMORY GUARD” is set to “ON” (see page 98).
■ Zone set F)ZONE SET
Zone 2 volume ZONE2 VOL
Zone 3 volume ZONE3 VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT or ZONE 3 OUTPUT
jacks.
Choices: VAR, FIX
• Select “VAR” to adjust the ZONE 2 OUTPUT or
ZONE 3 OUTPUT volume simultaneously with
VOLUME +/– on the remote control.
• Select “FIX” to fix the ZONE 2 OUTPUT or ZONE 3
OUTPUT volume level to a standard line level.
Note
Note
[AUTO LAST
C)AUDIO SELECT
[p]/[[]:Adjust
[AUTO LAST
D)DECODER MODE
[p]/[[]:Adjust
Notes
CLASSICAL
*LIVE/CLUB
ENTERTAINMENT
*MOVIE
STEREO
SURROUNDDECODE
Press DSP key
E)PARAM.
INI
. ZONE2 VOL;;;;VAR
ZONE3 VOL;;;;VAR
ZONE2 AMP;;;;EXT
ZONE3 AMP;;;;EXT
F)ZONE SET
[]/[]:Up/Down
[]/[]:Adjust
p
p
[p
01EN_00_RX-V1700_U.book Page 99 Tuesday, June 27, 2006 9:37 AM