Filter
Top Products
126 En
TROUBLESHOOTING
■ XM Satellite Radio (U.S.A. and Canada models only)
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
Status message Cause Remedy
See
page
CHECK ANTENNA
The XM Passport and XM Passport Home
Dock are not connected to the XM jack of
this unit or do not work properly.
Check XM Passport and XM Passport Home Dock
connections and orient for the best reception level.
61
UPDATING
The XM user encryption code is being
updated.
Wait until the encryption code is updated.
—
NO SIGNAL
The signal is too weak. Adjust the orientation of the XM Passport System for
the best reception level.
61
LOADING
It takes longer than four seconds for audio
or text data to be decoded.
Wait until the decoding process has finished.
—
OFF AIR
The XM Satellite Radio channel you
selected is not currently broadcasting any
signals.
Check the channel number again or select another
XM Satellite Radio channel.
—
<XM> - - -
The Channel Station ID (SID) is no longer
available.
- - - / - - -
No artist name or song title is available.
<CAT> - - -
No channels are available for the selected
category.
Select another channel category by pressing
CATEGORY on the front panel (or A-E/CAT. j / i on
the remote control) repeatedly.
67
01EN_00_RX-V1700_U.book Page 126 Tuesday, June 27, 2006 9:37 AM