Filter
Top Products
82 En
ADVANCED SOUND CONFIGURATIONS
Decoder parameter descriptions
■ Selecting decoders used with sound
field programs
Use this feature to select the desired decoder used with
MOVIE sound field programs (except “Mono Movie”).
See page 47 for details about MOVIE sound field
program.
1 Set the operation mode selector to AMP and
then press MOVIE on the remote control
repeatedly to select the desired MOVIE
sound field programs.
2 Press SELECT repeatedly to select the
desired decoder used with the selected
sound field program.
You can select from the following decoders
depending on the type of source you are playing and
your personal preference.
y
You can select the desired decoder by pressing SELECT and
then press l / h repeatedly on the remote control.
Available decoders
Decoder parameter Features
PRO LOGIC IIx Music
PRO LOGIC II Music
PANORAMA
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as
well as the front speakers for a wraparound effect.
Choices: OFF, ON
PRO LOGIC IIx Music
PRO LOGIC II Music
DIMENSION
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front
or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
PRO LOGIC IIx Music
PRO LOGIC II Music
CENTER WIDTH
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely
towards the center speaker or towards the front left and right speakers. A larger value moves the center
channel output towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
DTS Neo:6 Music
C.IMAGE
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as necessary.
Control range: 0.0 to 1.0
Initial setting: 0.3
4
MOVIE
TV
SOURCE
AMP
Decoder Functions
PRO LOGIC
Dolby Pro Logic processing for
any sources
PLIIx Movie
PLII Movie
Dolby Pro Logic IIx (or Dolby
Pro Logic II) processing for
movie sources.
The Pro Logic IIx
decoder is not available when “SB
L/R SP” is set to “NONE” (see
page 89).
Neo:6 Cinema
DTS processing for movie
sources
01EN_00_RX-V1700_U.book Page 82 Tuesday, June 27, 2006 9:37 AM