Filter
Top Products
35 En
AUTO SETUP
PREPARATION
9 Press ENTER to display the setup results in
detail.
10 Press l / h repeatedly to toggle between the
setup result displays.
y
If you are not satisfied with the results or want to manually
adjust each parameter, run “MANUAL SETUP” (see
page 84).
• If you change speakers, speaker positions, or the layout of
your listening environment, run “AUTO SETUP” again to
recalibrate your system.
• The distances displayed in the “DISTANCE” results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the “EQ” results, different values may be set for the
same band to provide finer adjustments.
RESULT:EXIT
. RESULT
. SP : 5/4/0.1
. DIST: 14.0/ 17.0ft
. LVL : -9.0/ +6.5dB
SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
p
p
[
ENTER
A-E/CAT.
PRESET/CH
RESULT:WIRING
FRONT L;;;;;;;OK
[]/[]:Select
[ENTER]:Return
p[
Notes
ENTER
A-E/CAT.
PRESET/CH
RESULT:WIRING
FRONT L;;;;;;;OK
FRONT L;;14.0ft
CENTER;;;17.0ft
FRONT R;;15.0ft
PRNS L;;;17.0ft
PRNS R;;;17.0ft
RESULT:DISTANCE1
[]/[]:Select
[ENTER]:Return
FRONT L;;;;;;LRG
RESULT:SIZE
CENTER 1:100Hz;;;+2.5dB
2:300Hz;;;-0.5dB
3:1.5kHz;;+0.5dB
4:1.8kHz;;+2.5dB
5:1.8kHz;;-3.5dB
6:2.5kHz;;+2.5dB
7:10kHz;;;+2.5dB
RESULT:EQ
[]/[]:Select
[ENTER]:Return
FRONT L;;;+1.0dB
CENTER;;;;-1.5dB
FRONT R;;;+6.5dB
PRNS L;;;;-9.0dB
PRNS R;;;;+1.0dB
RESULT:LEVEL1
[]/[]:Select
[ENTER]:Return
[]/[]:Select
[ENTER]:Return
[]/[]:Select
[ENTER]:Return
p[
p[
p[
p[
p[
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the frequency
response of each speaker
Results of the parametric
equalizer of each speaker
Results of the speaker
output level
01EN_00_RX-V1700_U.book Page 35 Tuesday, June 27, 2006 9:37 AM