Filter
Top Products
90 En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
■ Speaker level B)SP LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in “SPEAKER SET” (see page 87).
Control range: –10.0 to +10.0 dB
Control step: 0.5 dB
Initial setting:
FR. L/FR. R/SWFR/PR. L/PR. R: 0 dB
CENT./SUR. L/SUR. R/SB L/SB R: –1.0 dB
• Select “FR. L” to adjust the balance of the front left
speaker.
• Select “FR. R” to adjust the balance of the front right
speaker.
• Select “CENT.” to adjust the balance of the center
speaker.
• Select “SUR. L” to adjust the balance of the surround
left speaker.
• Select “SUR. R” to adjust the balance of the surround
right speaker.
• Select “SB L” to adjust the balance of the surround
back left speaker.
• Select “SB R” to adjust the balance of the surround
back right speaker.
• Select “SWFR” to adjust the balance of the subwoofer.
• Select “PR. L” to adjust the balance of the presence left
speaker.
• Select “PR. R” to adjust the balance of the presence
right speaker.
• “CENT.”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”,
“PR. L” and “PR. R” cannot be adjusted if “CENTER SP” (see
page 88), “SUR. L/R SP” (see page 88), “SB.L/R SP” (see
page 89), “LFE/BASS OUT” (see page 87) and “PRESENCE
SP” (see page 89) are set to “NONE” respectively.
• Instead of “SB L” and “SB R”, “SB” is displayed if “SB.L/R
SP” is set to either “SMLx1” or “LRGx1” (see page 89).
■ Speaker distance C)SP DISTANCE
Use this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
Unit UNIT
Choices: meters (m), feet (ft)
Initial setting:
[U.S.A. and Canada models]: feet (ft)
[Other models]: meters (m)
• Select “meters” to adjust speaker distances in meters.
• Select “feet” to adjust speaker distances in feet.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
Initial setting:
FRONT L/FRONT R/SWFR/PRNS L/
PRNS R: 3.00m (10.0ft)
CENTER: 2.60m (8.5ft)
SUR. L/SUR. R/SB L/SB R: 2.40m (8.0ft)
• Select “FRONT L” to adjust the distance of the front
left speaker.
• Select “FRONT R” to adjust the distance of the front
right speaker.
• Select “CENTER” to adjust the distance of the center
speaker.
• Select “SUR. L” to adjust the distance of the surround
left speaker.
• Select “SUR. R” to adjust the distance of the surround
right speaker.
• Select “SB L” to adjust the distance of the surround
back left speaker.
• Select “SB R” to adjust the distance of the surround
back right speaker.
• Select “SWFR” to adjust the distance of the subwoofer.
• Select “PRNS L” to adjust the distance of the presence
left speaker.
• Select “PRNS R” to adjust the distance of the presence
right speaker.
Notes
.FR.L;;;;;;;;;;
FR.R;;;;;;;;;;
CENT.;;;;;;;;;;
B)SP
LEVEL
-__________+
[]/[]:Up/Down
[p]/[[]:Adjust
p
p
. UNIT;;;;;;;;feet
FRONTL;;;10.0ft
FRONTR;;;10.0ft
CENTER;;;;8.5ft
[]/[]:Up/Down
[]/[]:Adjust
C)SP
DISTANCE
p
p
p
[
01EN_00_RX-V1700_U.book Page 90 Tuesday, June 27, 2006 9:37 AM