Filter
Top Products
22 En
CONNECTIONS
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
• When “V CONV.” is set to “OFF” (see page 97), be sure to make the same type of video connections as those made for your TV (see
page 21). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to
the VIDEO jacks.
• When “V CONV.” is set to “ON” (see page 97), the converted video signals are output only at the MONITOR OUT jacks. When
recording a source, you must make the same type of video connections between each component.
• To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL
OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT”
(see page 94).
• If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is
given to the signals input at the DIGITAL INPUT (COAXIAL) jack.
• The parameter displays do not appear when the component video signals with 720p, 1080i or 1080p are input.
• The parameter and short message displays do not appear when the component video signals with 480p/576p, 720p, 1080i or 1080p
resolutions are input and output at the VIDEO or S VIDEO MONITOR OUT jack.
■ Connecting a DVD player
Connecting other components
Notes
CAUTION
VIDEO
COMPONENT VIDEO
HDMI
DIGITAL INPUT
D
VD
COAXIAL
DVD
OPTICAL
5
2
DVD
DVD
Y
P
R
P
B
DVD
IN 1
A
R
L
LR
C
O
V
S
PR PB Y
(U.S.A. model)
DVD player
HDMI out
Coaxial out
Component out
S-video out Video out
Optical out
Audio out
indicates recommended connections
indicates alternative connections
01EN_00_RX-V1700_U.book Page 22 Tuesday, June 27, 2006 9:37 AM