Filter
Top Products
E-20
RECORDING FUNCTIONS
English
Finalization is the process that concludes recording, and
allows a CD-R disc to be played on a standard CD player.
(Please note that CD-RW discs can only be played on a
CD-RW compatible player even after finalization has
been performed. CD-RW discs cannot be played on a
standard CD player.)
• Please note that once a CD-R disc is finalized,
recording is no longer possible. Please ensure the disc is
in its final form before performing finalization.
• If the power is turned off or interrupted during
finalization, the recorded material may be lost and the
disc may not be usable.
Finalization
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEATRANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMERDISPLAY
OPEN/
CLOSE
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
FINALIZE
FINALIZE
STOP &
&
PLAY #
^
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNCX2X4
R
dB
L
SF
3244 481
–
60 30 10 6 4 2 1 0 OVER00
–––––––
To finalize a CD-R or CD-RW disc
1 Load a recorded (but not finalized) CD-R or CD-RW
disc.
• Before loading the disc, make sure there are no
scratches, dust, fingerprints or similar marks on the
disc. If necessary, clean the disc as described on
page 29.
2 Press FINALIZE.
• If you want to cancel finalization, press &
(STOP & on the remote).
3 Press ^ (PLAY # on the remote) to start the
finalization procedure.
• The remaining time required for finalization to
complete is displayed. Finalization can usually be
completed within about 2 minutes.
• When CD-R disc finalization is complete, the CD-
R indicator changes to the CD indicator in the
display, and the recorder is put in the stop mode.
• When CD-RW disc finalization is complete, the
TOC indicator lights in the display, and the
recorder is put in the stop mode.
Notes on finalization
• Once the finalization process has started, no other
operation is possible until finalization has been
completed.
• If the disc is marked or scratched, finalization may not
be possible.
• Do not turn off the power or disconnect the power
during finalization.