E-16
RECORDING FUNCTIONS
English
This is a recording mode used when manual control of the
recording is required or preferred.
(Please note that synchronized recording (single or ALL)
is recommended when making a digital recording from
CD or MD, etc.)
Manual recording
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEATRANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMERDISPLAY
OPEN/
CLOSE
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
3244 48.1
–
60 30 10 6 4 2 1 0 OVER00
–––––––
REC MUTE REC INPUT
&
^
REC MUTE
REC
STOP &
PAUSE *
PLAY #
4 Adjust the recording level as described on the
following page.
• The recording level of digital and analog sources
can be adjusted.
• Start playing the source to set the recording level.
When the recording level is set, stop playback of
the source component.
• The recording level cannot be changed when the
CD DIRECT function is on.
5 Press ^ (PAUSE * or PLAY # on the remote) to
start recording.
6 Start playing the source.
7 After recording is complete, press & (STOP & on the
remote) to stop recording.
• “Wait” blinks in the display while information is
being written to the PMA (Program Memory Area).
To pause during recording
Press ^ (PAUSE * on the remote) to pause recording
temporarily. “Standby” blinks in the display while
information is being written to the PMA (Program
Memory Area).
To resume recording, press ^ (PAUSE * or PLAY #
on the remote).
To record blank space at the end of a
track
Press REC MUTE.
A 4-second blank space is recorded, and the unit
automatically enters the record pause mode.
• The REC indicator blinks while blank space is being
recorded.
• You can create blank spaces longer than 4 seconds by
pressing and holding REC MUTE. The unit is put in
the record pause mode when the button is released.
• REC MUTE cannot be used when the record pause
mode is activated from the stop mode.
When you are finished recording, follow the
finalization procedure described on page 20.
1 Load a CD-R or CD-RW disc containing space for
recording.
• To ensure proper recording, make sure that you
have more than enough space on the disc.
2 Press REC.
• This unit enters record pause mode.
3 Set INPUT on the front panel to the appropriate input
to be used for recording.