E-10
English
BASIC OPERATION
To load a disc
1 Press POWER on the front panel to turn the power
on.
2 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to open the disc tray.
3 Load a disc using the disc guide to align the disc
correctly in the disc tray.
• When loading a prerecorded CD disc, load the disc
with the label side up.
• When loading a CD-R or CD-RW disc for
recording, load with the recordable side down.
4 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to close the disc tray.
5 Select the function you want.
• For disc recording functions, see pages 12 to 20.
• For disc playback functions, see pages 23 to 27.
To load an 8 cm (3 in.) CD disc
Place it in the inner recessed area of the disc tray. Do not
put a normal 12 cm (5 in.) CD disc on top of an 8 cm (3
in.) CD disc.
Note
• You can also close the disc tray by pressing the front edge of
the disc tray gently. Play begins automatically if the tray is
closed by pressing ^ on the front panel or PLAY #, a
numeric button, or RANDOM on the remote. However, the
display will not show the total number of tracks or the total
recorded time of the disc.
When a disc is loaded
When a disc is loaded in the recorder, the recorder
performs a number of internal operations to determine the
format and content of the disc. During this time,
“Reading” appears in the display. This process requires
approximately 10 seconds to complete for any type of
disc.
When a new CD-R or CD-RW disc is loaded in the
recorder, OPC (Optimum Power Calibration) is usually
performed as well. OPC optimizes the laser power to the
reflectivity of the disc. During this time, “OPC Adjust”
appears in the display. This process requires an additional
15 seconds to complete. Recording is not possible until
these operations are complete.
After the disc has been read and any necessary internal
adjustments have been performed, one of the following
displays appear, and normal operation of the recorder is
possible.
A prerecorded audio CD disc is loaded in the recorder.
A CD-R or CD-RW disc that has not yet been recorded on
is loaded in the recorder.
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEATRANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMERDISPLAY
OPEN/
CLOSE
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
Turning on the power
and loading a disc
OPEN/CLOSE
OPEN/CLOSEPOWER
CD-R
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
3244 48.1
–
60 30 10 6 4 2 1 0 OVER00
–––––––
TOTAL
REMAIN
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
–
60 30 10 6 4 2 1 0 OVER00
–––––––
CD
R
dB
L
–
60 30 10 6 4 2 1 0 OVER00
–––––––
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
AUTO
TOC
R
dB
L
SF
32
–
60 30 10 6 4 2 1 0 OVER00
–––––––