Filter
Top Products
En 108
Network
IP Address Configures the network parameters (IP address, etc). 117
Network Standby Selects whether or not to turn on this unit by the command from other network devices. 118
MAC Address Filter Sets the MAC address filter to limit access to this unit from other network devices. 118
Multi Zone
Zone2 Set
Zone3 Set
Volume Enables/disables volume adjustments for Zone2 or Zone3 output. 118
Max Volume Sets the Zone2 or Zone3 maximum volume so that sound is not too loud. 118
Initial Volume Sets the Zone2 or Zone3 initial volume for when this unit is turned on. 118
Mono Switches between stereo and monaural for Zone2 or Zone3 output. 119
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 119
Party Mode Set Enables/disables switching to the party mode for each zone. 119
Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. 119
Zone Rename Changes the zone names displayed on the front display or TV screen. 120
Function
Auto Power Down Sets the amount of time for auto-standby. 120
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 120
Display Set
Front Panel Display
Dimmer Adjusts the brightness of the front display. 121
Scroll Sets the scrolling manner of the front display. 121
Short Message Selects whether to display short messages on the TV screen when this unit is operated. 121
Wall Paper Selects a wall paper displayed on the TV. 121
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 121
Target Zone Specifies the zone with which the TRIGGER OUT jack functions synchronized. 121
Target Source Specifies the output level of the electronic signal transmitted with each input switching. 122
Manual Switches the output level for electronic signal transmission manually. 122
Memory Guard Prevents accidental changes to the settings. 122
Language Select an on-screen menu language. 122
Menu Item Function Page