Filter
Top Products
En 107
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Optimizes the speaker settings automatically (YPAO). 44
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 109
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 109
Power Amp Assign Selects a speaker system. 109
Configuration
Front Selects the size of the front speakers. 110
Center Selects whether or not a center speaker is connected and its size. 110
Surround Selects whether or not surround speakers are connected and its size. 110
Surround Back Selects whether or not surround back speakers are connected and its size. 110
Front Presence Selects whether or not front presence speakers are connected. 110
Rear Presence Selects whether or not to rear presence speakers are connected. 110
Subwoofer 1
Subwoofer 2
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase. 111
SWFR Layout Selects a subwoofer layout when 2 subwoofers are used. 111
Extra Bass Sets the speakers to produce the front channel low-frequency components. 111
Distance Sets the distance between each speaker and listening position. 111
Level Adjusts the volume of each speaker. 111
Parametric EQ
PEQ Select Selects a type of equalizer to be used. 112
PEQ Data Copy Copies the parametric equalizer values acquired with “Auto Setup” to the “Manual” fields for fine adjustment. 112
Test Tone Enables/disabled the test tone output. 112
Sound
Lipsync Adjusts the delay between video and audio output. 113
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 113
Max Volume Sets the maximum volume so that sound is not too loud. 113
Initial Volume Sets the initial volume for when this receiver is turned on. 113
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 113
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with volume adjustments. 114
Video
Analog to Analog Conversion Enables/disables the video conversion between the analog video jacks. 114
Processing Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 114
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (ARC, TV audio input, etc). 116
Audio Output Selects a device to output audio. 117
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when this unit is in standby mode. 117