Yamaha HTR-5835 Stereo Receiver User Manual


 
• When playing a DTS-CDiLD. be sure to set the INPUT MODE
to DTS.
• If the digital output data of the player has been processed in an?"
wa3: you may not be able to perfom_ DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.
Displaying information about the input
source
You can display the type, fomlat and sampling frequency
of the current input signal.
1 Select the input source.
Press AMP to select the AMP mode, then
press STRAIGHT so that "STRAIGHT"
appears in the display.
STP_IGHT
then %
}
STRAI GHT
WWil'dqiI'ti
3 Press u / d to display the following
information about the input signal.
(Format)
rate
Jig
Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
Number of source channels in the input
signal. For example, a multi-channel
soundtrack with 3 front channels, 2
sun'ound channels and LFE, is
displayed as "3i2iLFE".
Sampling frequency. When the unit is
unable to detect the sampling
fi'equency "Unknown" appears.
Bit rate. When the unit is unable to
detect the bit rate "Unknown" appears.
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switch decoders.
31