Yamaha HTR-5835 Stereo Receiver User Manual


 
Select a sound field program if desired.
Press PROGRAM I h repeatedly (or press AMP
to select the AMP mode, then press one of the sound
field program buttons on the remote control) to select
a sound field progrmn. (See page 48 for details about
sound field programs.)
Front panel
or
',AM_
Remote control
To listen with headphones
("SILENT CINEMA")
"SILENT CINEMA" allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinal7 headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the l}ont panel display.
This unit will not be set to "SILENT CINEMA" when MULTI
CH INPUT is selected as the input source.
• "SILENT CINEMA" is not effective when the Direct Stereo or
2ch Stereo program is selected, or in STRAIGHT mode.
.iwdrP%l,tl
To adjust the tone
You can adjust the tonal quality
of your front left and right
speakers or headphones (when
connected).
Press TONE CONTROL on the
fi'ont panel repeatedly to select
TREBLE or BASS, then press
BASS/TREBLE _+ repeatedly
to increase or decrease.
Select TREBLE to adjust the
high frequency response.
TONECONXaOL
Select BASS to adjust the low l'requeney response.
Y
Speaker and headphone ac[iustmentsare stored independemly.
If you increase or decrease the high-frequency or low-frequency
sound to an extreme level, the tonal quality of the surrotmd
speakers may not match that of the front left and right speakers.
TONE CONTROL is not effective with the Direct Stereo
progam (page 29) or MULTI CH INPUT.
\_]len TC. BYPASS is set to AUTO (page 57), and BASS and
TREBLE are set to 0 dB, audio output automatically bypasses
this unit's tone control circuitry.
To mute the sound
Press MUTE on the remote control.
The MUTE indicator flashes in the
fi'ont panel display.
To resume the audio output, press
MUTE again (or press VOLUME /+).
The MUTE indicator disappears from
the display.
Y
Youcan adiust the mnting level (see page 57).
25