Filter
Top Products
|_I];|I=_I]I_7*_T;II|_I];[liJI[I];J:
This section describes the function of each control on the
remote control used to control this unit. To operate other
components, see "REMOTE CONTROL FEATURES" on
page 60.
_
......
©
DVD DTV/CBL VCR V AUX
©....
[NMF)
--TV--
MUT[ INPUT
STEREO NUS_C ENI'ERrAIN NOVlE
@@C9
_YANAHA
@
,@
I Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 Input selector buttons
Select the input source and change the control area.
3 Sound field program/numeric buttons
Use to select sound field programs.
Use numbers 1 through 8 to select preset stations when the
unit is in tuner mode.
Use SELECT to playback 2-channel sources in surround
(see page 28).
Use EXTD SUR. to turn on/off the extended surround
modes (see page 27).
Use DIRECT ST. to playback 2-channel sources in high
fidelity sound (see page 29).
4 SPEAKERS A/B
Use to turn on or off the set of front speakers connected to
the A and/or B terminals on the rear panel each time the
con'esponding button is pressed.
5 LEVEL, BAND
Selects the speaker channel to be adjusted and sets the
level.
Switches the reception band when the unit is in tuner
mode.
6 Cursor buttons u/d /j /i/ENTER
Use to select and adjust sound field program parameters or
SET MENU items.
PressJ i to select a preset station group (A to E) when
the unit is in tuner mode.
Press t.a d to select a preset station number (1 to 8)
when the unit is in tuner mode.
7 RETURN, MEMORY*
Returns to the previous menu level when adjusting the
SET MENU parameters.
8 STANDBY
Sets this unit in the standby mode.
9 SYSTEM POWER
Turns on the power of this unit.
0 SLEEP
Sets the sleep timer.
A MULTI CH IN
Selects multi-channel input when using an external
decoder (etc.).
B CODE SET
Use to set up remote control codes (see page 61).