Wolf DCX-1000FD Home Theater System User Manual


 
Wolf Cinema Owner's Manual
3-40
Section3►Operation
Color Temp Adjust
NOTE: Keep new x,y coordinates within the original color gamut triangle shown here.
PROCEDURE FOR X,Y ADJUSTMENTS: See 3.10, Using Multiple Projectors.
Color Temp Adjust: Use this submenu
if you do not have specic color
coordinates in mind and will simply
judge color performance by meter. Like
the Color Adjustment by X,Y submenu,
each color control actually denes
new x/y coordinates for that color and
changes its hue — it is just a different
interface.
Adjust the hue of each primary color
(red, green, blue, and white) by using
more or less of it in relation to the other
colors.
NOTE: A Color Temp Adjust adjustment denes the corresponding x/y coordinates shown in
the Color Adjustment by X,Y submenu. These x/y coordinates will remain stable for this User
gamut until they are changed again via either menu. Values displayed in the Color Temp Adjust
menu, however, will likely uctuate as you use the projector, and will be different when you return
to this menu at some point in the future. These oating changes do not affect the x/y coordinates
or gamut.
Figure 3.10. Chromaticity Diagram
(without Yellow Notch Filter)